ATI Lift Table Options
ATI Lift Table Options
Reliability is built into every option!
Hydraulic Power Options
Standard electric motor furnished is 1 HP, 110 volt AC. Optional motors are
230 volt AC, single phase; 230/460 volt AC, 3 phase; all with 110 volt AC controls.
Larger motors--2, 3, 5, 7.5, and 10 HP--are available on larger tables for increased lift
speed. Higher horsepower motors may have to be external to table; consult factory.
1HP remote powerpack layout drawing
3HP-5HP remote powerpack layout drawing
|Optional Air Motor
Available on all ATI tables and maintenance lifts, the optional air motor can be
plugged into any standard compressed air line. It is quiet, highly efficient, and
meets safety requirements for operation in hazardous atmospheres where non-sparking
equipment must be used.
Designed for extended life in applications requiring regular washdown, such as
food processing or other wet, high-humidity environments. Extra protection for the
motor's interior using Rust-Oleum® coatings prevents rust and corrosion build-up.
|Automatic Height Gauge
Keeps table at constant, predetermined level. When sheet or other material
is removed, the table raises; when material is added, the table lowers. Operates by
electric eye sensor for accurate gauge adjustments from 8 to 56 in. Automatic
adjustment up or down. Selector switch used to select up or down movement.
Wheels are available on all ATI tables. Standard wheels are steel and are
mounted outside the table base. A pivoting handle and dual swivel rear wheels are
used for steering. Adding wheels increases lowered and raised table hieghts by 1
in. Wheels can also be mounted underneath the table base which raises table height
by 8 in. Solid rubber wheels are available for outdoor use or where floors require
By design, the safety skirts extend the service life of machines by shielding the
internal mechanisms from operational debris. Skirts are manufactured from tough,
extra heavy duty, 23 ounce vinyl coated polyester that will expand and compress with the
movement of the machine regardless of vertical, horizontal or angular change in
position. Skirts are mounted either inside or outside of table top using velcro
adhesive for ease of maintenance and access to unit.
Formed rubber bumper for mounting on the corners of ATI lift tables to
protect against impact or collision damage, especially useful on mobile tables. Order a
set with all your lift tables. Can also be retrofitted on existing tables.
Bumper has 3" high profile.
Perfect when a precise lifting height is required repeatedly, our limit switch is
compact, reliable and accurate.
|Powered Table Controls
On tables equipped with electric power, there are two control options:
foot-operated remote control and push button remote control.
Zinc metalizing, galvanizing, Steel-It paint, epoxy paint and similar coatings
are available for an extra charge. Consult factory.
All units come with industrial enamel gloss paint in ATI's standard yellow or
green. Custom requests accepted for additional setup fee and cost of paint.
ATI offers a broad line of 2,000 products to address most needs however we
recognize that occasionally your needs may be very unique. In those instances, our
engineers can specially design equipment that will solve your specific material handling
requirement. Consult factory for more details.
|Double Acting Power System
Perfect when precise control over downward speed is required as in conveyor and
material transfer applications. Lift cylinders are powered down to achieve at least
equivalent speed of upward cycle.
When maximum mobility and versatility is required, a self-propelled drive unit
can be coupled with any lift table. The battery powered self-propelled drive is
equipped with variable speeds up to 4 mph and has 180° steering capability and 90° to
each side offering remarkable maneuverability in crowded areas. It is equipped with
a two-position, spring loaded mechanical break, a safety belly-button switch, a horn, and
lifting function controls built into the steering handle for convenient operation.
|Rotating Table Top
Best suited for material redirection operations such as conveyor systems and
transfer applications. Available in manual or hydraulic powered 360° rotation for
automatic system operation.
|Heavy Duty Cycle Package
For semi-continuous duty applications where a unit is used more than 8 times per
day, a heavy duty cycle package is recommended. Hardened bushings at pivot points of
scissors, rollers secured with fiber bushings and grease fittings on the cylinder all work
together to extend the life of the table. Furthur, the shaft on the rollers can be
easily replaced when worn out to ensure years of trouble free operation.
|Extra Heavy Duty Cycle Package
For continuous duty applications where a unit is used more than 16 times per day,
an extra heavy duty cycle package is recommended. Roller bearings at pivot points of
scissors, the use of cam followers and grease fittings on the cylinder and key pivot
points all work together to accommodate continuous duty applications. Like the heavy
duty cycle package, the shaft on the rollers can be easily replaced when worn out to
ensure years of trouble free operation.
Request a Quote
Submit your handling problem for a free solution!