by Air Technical Industries | Oct 7, 2015 | Industrial Equipment
A customer in the oil and gas industry was looking for a safe way to remove the bundle or inner case assembly of a oil pump line pump. They needed to reach up and over to a height of about 13 feet. The parts themselves only weighed a few hundred pounds. We designed an... 
by Air Technical Industries | Sep 9, 2015 | Industrial Equipment
In the middle of construction of a new manufacturing facility, the project manager had a problem that was threatening to stall the progress, delay completion, and add more cost to the budget. Air conditioning units, about 25 of them, that weighed 545 lbs. needed to be... by Air Technical Industries | Aug 26, 2015 | Industrial Equipment
A customer that manufactures slot machines was looking for an easy way for operators to work on them at an ergonomic height. The slot machines were on rollers and would need to be loaded at ground level. They could weigh up to 500 lbs maximum. This was a perfect fit... 
by Air Technical Industries | Aug 19, 2015 | Industrial Equipment
Hospital builds a new emergency department and turns to Air Technical to solve issue. After concrete was poured and dumbwaiters were installed to transport instruments up and down from the emergency room, they had a 7” rise from the floor to the dumbwaiter to... by Air Technical Industries | Aug 5, 2015 | Industrial Equipment
A customer in the curtain wall hanging industry was looking for a good way to lift and place his curtain wall into position. The sections could weigh up to 1,500 lbs maximum and would need to be lifted about 10 feet high to get into position. The Reversible Boom...